As we get older our bodies move differently. They feel less fluid and sometimes need a little help to get going. Much like our bodies, our car’s engine ages over time and can lose its efficiency and power. As your engine a gains more kilometers, oil alone can’t do the job. Rislone Engine Repair helps to stop and prevent these problems and also extends the useful life of your engine.
The natural wear that occurs inside even today’s modern engines can cause reduced oil pressure, loss of compression, lower fuel efficiency, leaks, smoking and noise. Rislone Engine Repair contains a combination of the industry’s best performance additives to repair these common oil-related problems. It restores your engine while improving the performance of worn cylinders, rings, bearings, and seals.
Your engine deserves some attention. Give it a bottle of Rislone Engine Repair and confidently get your car back on the road.
Part Number: 44110
Dosage: 1 bottle treats 4 to 6 litres of oil
Size: 500 mL
How does Rislone Engine Repair work?
Engine Repair contains a combination of the best performance additives to repair the most common oil-related problems. Engine Repair restores lost compression and power, reduces noise and oil consumption, while improving the performance of worn cylinders, rings, bearings, and seals.
Will Rislone Engine Repair clog my oil filter?
No, Rislone Engine Repair does not contain any sticky substances that would clog or damage your oil filter. It works chemically to stop leaks in gaskets and seals.
Will Rislone Engine Oil Stop Leak work in synthetic oil?
Yes, Rislone Engine Repair is compatible with ALL types of engine oils, including petroleum, synthetic and high-mileage formulas
Isn’t Engine Oil Enough?
Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection and is a method of removing contaminants. As lubricants degrade, their properties change, leading to increased friction and wear. Over time the natural wear that occurs inside the engine causes reduced oil pressure, loss of compression (power loss), lower fuel mileage, oil consumption (leaks & smoking) and noise (knocking & ticking).
Can I add to existing oil?
Yes, remove engine dipstick and check oil level. If oil is low, remove oil cap and install entire contents of the two chamber bottle. Do NOT overfill. Top off with manufacturers recommended engine oil as needed. Reinstall dipstick and oil cap. Drive/idle engine for 10-15 minutes.
If I install more than the recommend amount, will it work faster or better?
No, we have formulated our product to work best at the suggested dosage amount.
What are the dosage recommendations?
One 500 mL bottle of 44110 is designed to treat 4 to 6 liters of oil, which is the normal size for most vehicles. On smaller systems from 2 to 3.9 liters, only use half bottle, pouring equal amounts from each side. For larger systems use one bottle for every 5 liters of capacity.
If first application does not completely stop my leak, may I add another bottle?
Yes, in engines with seriously damaged components, a second treatment may be required. In this case, it is suggested that the oil and filter be changed, and a second application of Engine Repair be added.
How long does it take to start working?
Rislone Engine Repair starts working the minute you install and start driving the vehicle. You will usually see results in about 150 km or two (2) days of driving.
Leave a Reply