Your trusty car has been with you a long time. It has safely gotten you where you need to be all these years. As vehicles age and gain more miles, however, the power steering fluid loses its strength and can’t do its job alone. This is when Rislone Power Steering Repair comes into play.
Internally, pumps whine, gears have play in them, valves stick, seals leak and the fluid quickly breaks down. Once installed, Rislone Power Steering Repair helps to stop and prevent these problems and enhances the useful life of your power steering system, and in turn extends the life of your car.
We know you don’t have time to take your car into the shop. That’s why we created our products to be the fastest, safest way to get your show back on the road. Simply follow the instructions on the bottle and give that power steering system the boost it needs to keep you and your car going.
Part Number: 44650
Dosage: One bottle treats 2 to 3 litres of power steering fluid.
Size: 500 mL
Will Rislone Power Steering Repair work in my vehicle?
Yes, Rislone Power Steering Repair is compatible with all petroleum based, mineral oil, synthetic and ATF power steering fluids. This includes all domestic, import and heavy duty power steering applications.
How long does it take to start working?
Depending on the power steering problem, results will either be immediate or noticeable within a few days of driving.
If first application does not completely stop the leak, may I add another bottle?
Yes, you can install a second application for hard to stop leaks. We recommend that the power steering fluid be changed and a second application of Rislone Power Steering Repair be added.
How much do I install?
The 500 mL Rislone Power Steering Repair, part number 24650, is designed for one bottle to be used for every 2 to 3 litres of power steering fluid, which is the amount most passenger cars and light trucks use. For larger systems use one bottle for every 2,5 litres of fluid capacity.
What are the symptoms of a power steering leak?
Depending on the severity of the leak, the first thing you may notice is spotting, where you will find fluid spots located on the driveway or garage floor. While looking under the vehicle around the area where the rack & pinion or gearbox is located; or the front of the engine where the belt is located, you will find fluid dripping. The next thing that happens is the steering wheel becomes harder to turn or does not turn smoothly. This is usually accompanied by a squealing or grinding noise when turning the wheel.
How does Rislone Power Steering Repair stop leaks?
This product works in two ways to help solve most any o-ring or seal leaks. 1) The seal restorer additive restores seal size, flexibility and elasticity lost due to heat, age and high mileage. 2) The seal polymer works by building a polymeric film around the seal or o-ring and also filling in any grooves worn in the shaft.
What causes power steering leaks?
The most common cause of power steering system leaks is age and/or high mileage. After time, power steering seals and o-rings tend to dry out and shrink causing leaks. Rislone Power Steering Repair works to revitalize these seals and makes them soft and pliable again.
I have fluid collecting in the rubber bellows at either end of my steering rack, is this normal?
No, the rubber bellows are mainly designed to keep dirt out of the steering rack and only keep in a small amount of thick grease which lubricates the inner tie rod ends. Any signs of fluid in or leaking from the bellows means a seal inside the rack is leaking. Rislone Power Steering Repair is the perfect product to use for this type of leak.
Will I damage my system if I drive without fluid in my power steering?
Yes, usually damage to your power steering pump will happen within relatively few miles if you continue to drive with little or no fluid in your power steering reservoir.
SDS Open | Download
Tech Sheet Open | Download
Leave a Reply